• 1x B-Series piping kit: 3 piece total for turbo and intercooler setup. Light weight aluminum design. Adjustment are needed depends on engine layout and different setups.
• 1x JDM sport Intercooler: tube and fin design, 31x11.5x3 inch cord size. 3inch in/outlet diameter, handles up to 30psi/500hp.
• 1x JDM sport T3/T4 Hybrid turbo w/ random filter: brand new built with 3inch diameter inlet, 2inch outlet, .50 A/R compressor, .63 A/R turbine .57 trim, and oil cooling system. 50+whp gain.
• 1x Stainless steel turbo manifold: Higher Resistance to Heat, Made to fit B16/B18 Series Engines, Bolt on Manifold. Fits with t3/t4 hybrid turbo and 35mm/38mm wastegates. Professional Installation Highly Recommended.
• 1x Turbo Downpipe: JDM advanced technology constructed. 2.75 inch diameter inlet /outlet. Direct connection with 5 bolt design to t3/t4 turbo. Gasket and hardware are not available at this time.
• 1x JDM Type RS style Blow off valve w/ bov adapter piping: Quick response with high capacity Up To 1200HP or 25 PSI of Boost Pressure. Professional Installation Suggested. Aggressive blow off sound comes with bolt flange and hardware. Adapter piping can be bolt on or weld on, easy installation.
• 1x 38mm tail style wastegate w/ hardware: wastegate body and valve are investment cast from 253MA Stainless Steel (ASTM S30815).It intended to withstand high temperature and flow capability. With Turbo Boost Controller you will able to Adjust Spring rate from 1-30 Psi w/o Change Springs.
• 1x Turbo Boost Controller: in order avoid replacing wastegate springs, which only give a fixed increase, which is not adjustable, a boost controller will be the most cost effective solution. Allows adjustable boost psi settings, light weight design to be mount under the hood. Hardware is included.
• 1x JDM Oil Feed Line: designed to limits oil flow, prevent blown oil seal. 36 inch long with 3/8 diameter stainless steel line, hardware and gasket is included w/ 1/8 inch fittings for the engine.
• X8 Silicon sealing couplers & x14 T-bolt clamps: 2.75 inch diameter couplers (color maybe vary) with flexible steel T-bolt clamps for better and stronger holdings to prevent leaking.
Most parts are bolt on but some items may require modifications.
All items color might be vary, please check with AJP for availability.
Professional installation is high recommenced.
Instructions are not included.